This page contains the detailed and easy notes for GCSE EDUQAS Chemistry The periodic table and Properties of elements for revision and understanding The periodic table and Properties of elements.

Banner 1

GCSE EDUQAS Chemistry The periodic table and Properties of elements Complete Revision Summary

The periodic table and Properties of elements

The periodic table and Properties of elements

• The periodic table
• Development of the periodic table
• Metals and non-metals
• Group 0
• Group 1
• Group 7
• Pure Substances
• Formulations
• Chromatography
• Test for Gases
• Test for Cation
• Test for Anions
• Instrumental Analysis

Mendleev’s Table Shortcomings

• Argon atoms have a greater relative mass than potassium which will place Argon in the group of sodium and lithium and potassium in the group of noble gases.
• Many other elements were found not fitting this pattern and were swapped by Mendleev’s to maintain the periodicity.

Present Periodic Table

• Organise the elements in the order of increasing atomic number
• All the shortcoming due to atomic weights were solved by organising the elements in the order of increasing atomic number.
• Heavy atoms are due to the presence of different isotopes of the elements.

Banner 2

Groups in the Periodic Table

Group 1: Alkali Metals

GROUP 1: Alkali Metals Physical Properties

• They are highly reactive
• Reactivity increases down the group – because tendency to loose one electron increases down the group due to increase increase in size and decrease in nuclear charge
• They loose one electron and form +1 Ions.
• They are stored in kerosene or oil to prevent them reacting from air and water
• They are soft, silvery and shinny.
• They look dull in air as they react with oxygen and form oxide which coats their surface
• Lithium is less reactive and francium is highly reactive.
• They have low melting and boiling point and the melting and boiling point decreases down the group.

Group 1: Alkali Metals Chemical Properties

REACTION WITH WATER

Reacts with water to metal hydroxide

2M + H₂O                  2MOH + H₂

Metal hydroxide are alkali therefore the pH increases. Reactivity increases down the group so potassium reacts violently

Fizzing is produced due to the formation of hydrogen.

Eg – 2Li(s) + H₂O(l)                   2LiOH(aq) + H₂(g)

Reaction with Oxygen

Reacts with oxygen to form a metal oxide

2M + O₂                        M₂O

Metals go dull in air due to this reaction

4Li(s) + 4O₂(g)                  2Li₂O(s)

Reaction with Halogens

React with halogens to form metal Halides

2M +X₂                   2MX [X= F, Cl, Br, I]

Metal Halides are while solids but dissolve in water to form colourless solutions.

2Li(s) + F₂(g)                  2LiF(s)

Banner 3

The periodic table and Propertie-merged

GCSE EDUQAS Chemistry The periodic table and Properties of elements Complete Revision Summary

FREE DOWNLOAD

Send download link to:

WHY REACTIVITY OF GROUP 1 INCREASES DOWN THE GROUP ?

The Reactivity of Group 1 increases down the group as the tendency to loose an electron increases down the group. – React by loosing an electron

FACTORS AFFECTING TENDENCY TO LOOSE AN ELECTRON

• To loose an electron small nuclear charge greater size of atom and greater shielding is required
• Nuclear charge – Great the size of the atom, the outer electron becomes further away from the nucleus decreasing the nuclear charge
• Shielding – More the number of inner electrons due to increases in number of shell greater will be the shielding of the outer electron from the nuclear charge
• Size of the atoms – Greater the size of the atom, the outer electron will become further away from the nucleus resulting in decreases in nuclear charge
• Down the group the atom size increases due to increase in number of electron shells. This results in the outer electron being further away from the nucleus.
• As the outer electron becomes further away from the nucleus the nuclear charge decreases. Increase in number of shells also increases the shielding and shields the outer electron from the nuclear charge.
• Therefore, the tendency of atom to loose an electron increases down the grou resulting in increase in reactivity down the group.

GROUP 7 : Halogens ( Salt Forming)

Banner 4

GROUP 7 : Halogens Physical Properties

• They are non metals
• They gain an electron to form -1 ions.
• They have low melting and boiling points
• Their melting point increases down the group due to increases in intermolecular forces.
• They are found in pairs and exist as diatomic molecules (X₂)
• They are poisonous and smelly
• Their reactivity increase down the group
• Their density increases down the group.
• They are poor conductors of heat and electricity

HALOGEN REACTION X[F,Cl,Br,I]

REACTION WITH HYDROGEN

They react with hydrogen to form hydrogen halides.

X₂(s) + H₂(g)                  2HX(g)

Reactivity decreases down the group so fluorine and chlorine reacts explosively and bromine and iodine reacts at higher temperature in the presence of catalyst.

REACTION WITH METALS

They react with metals to form ionic compounds. In Ionic compounds, halogens gain one electron from the metals to form -1 ions and attain noble gas electronic configurations.

2Na(s) + Cl₂(g)                  NaCl(s)

Mg(s) + Cl₂(g)                  MgCl₂(s)

DISPLACEMENT REACTION

The more reactive halogen displaces the less reactive halogen from its salt

As the reactivity decreases down the group, the halogen at the top can take the position of the halogen at the bottom in its compounds and will displace the less reactive halogen.

Cl₂    +               2NaBr                               2NaCl + Br₂(yellow solution formed)

(more               (salt of less reactive        (chlorine being more reactive has taken the reactive)     halogen than Chlorine)     position of less reactive bromine in its

compounds)

Cl₂ +2NaF                    No reaction

F2 – can displace all halogens

Cl₂ – can displace all Halogen except Fluorine

Br₂ – can displace only Iodine

F          Cl         Br           I

decreasing reactivity

WHY REACTIVITY OF GROUP 7 DECREASES DOWN THE GROUP ?

The Reactivity of Group 7 decreases down the group as the electron affinity or tendency to gain the electron decreases down the qroup. – React by gaining electron

Banner 5

FACTORS AFFECTING TENDENCY TO GAIN AN ELECTRON

• To gain an electron, smaller nuclear charge smaller size and less shielding is required
• Nuclear Charge – Smaller the size of the atom, greater will be the force of the nucleus as the electron will be closer to the nucleus.
• Shielding – Less electrons and shells, smaller will *be the shielding which will in turn increa the nuclear charge.
• Size of Atom – Greater the size of the atom, the outer electron will become further away from th nucleus resulting in decreases in nuclear charge
• Down the group the atom size increases due to increase in number of electron shells. As a result the nuclear charge decreases.
• The size of the atom also increases down the group which makes the nuclear charge weaker
• The electron shells also increases which decreases the effective nuclear charge on the incoming electron.
• Due to all these factors, the nuclear charge decreases which decreases the tendency of gaining electrons down the group of halogen making them less reactive.

COMPARISON BETWEEN GROUP 1 and GROUP 7

Baneer 6

TRANSITION METALS

• Found between group 2 and group 3
• They are hard
• They are strong
• They are malleable and ductile
• They have higher densities than group 1 and group 2 hence they are used in construction purpose like iron.
• They show variable oxidation states
• They are used commercially as catalyst
• They form coloured compounds.
• They show the reaction with oxygen, water and halogen like group 1 but they react much slowly than alkali metals.

Banner 7

BASIC TERMS OF PERIODIC TABLE

Periodic Table – A table that shows arrangement of all the known elements in the order of increasing atomic number. The table is organised into periods and groups.

Metals- Elements found to the left of the periodic table which are soft, shinny, conductors malleable and ductile eg Group 1; group 2 and group 3 elements

Non Metals — Elements found to the right of the periodic table which are dull, insulators Group 4,516 and 7 are non metals.

Halogens Group 7 elements are halogens as they are salt forming.

Alkali Metals Group 1 elements which react with water to form alkali

Noble Gases — Group 0 elements which are stable and do not react as they have complete outer shell

Elements found between group 2 and group 3 which have high densities, show variable oxidation states

Transition Metals and form coloured compounds

Periods- Horizontal rows of the periodic table

Groups – Vertical columns of the periodic table

Group Number – Indicates the number of electrons in the outermost shell.

Alkali Bases that are soluble in water

Displacement Reaction — When a more reactive element displaces the less reactive element from its salt

Banner 8

Q1 Look at the periodic table and give two examples of each

Metal — Li, Na

Non Metal – O₂, F₂

Alkali Metal – K, Li

Halogens – F, Cl

Noble Gas – He, Ar

Semi metal or metalloid – Si

Metals that form +1 ions – Li, K

Non metal that form -1 ions – F, Cl

Metal that form +2 ions – Mg, Ca

Transition metal – Fe, Cu

Q2 Write the name of most reactive halogen and most reactive alkali metals

Halogen –F Alkali Metal – Fr

Q3 Why the alkali metals gets more reactive down the group

Down the group the atom size increases due to increase in number of electron shells. This results in the outer electron being further away from the nucleus. As the outer electron becomes further away from the nucleus the nuclear charge decreases. Increase in number of shells also increases the shielding and shields the outer electron from the nuclear charge. Therefore, the tendency of atom to loose an electron increases down the group resulting in increase in reactivity down the group.

Q4 Why halogens get less reactive down the group

Down the group the atom size increases due to increase in number of electron shells. As a result the nuclear charge decreases. The size of the atom also increases down the group which makes the nuclear charge weaker. The electron shells also increases which decreases the effective nuclear charge on the incoming electron. Due to all these factors, the nuclear charge decreases which decreeases the tendency of gaining electrons down the group of halogen making them less reactive.

Q5 Write the balanced chemical equation with state symbols of

1. a) Potassium with water

2K(s) + 2H₂O(g)                    2KOH(aq) +H₂(g)

1. b) Lithium with oxygen

4Li(s) + O₂(g)                    2Li₂O (s)

1. c) Sodium with bromine

2Na(s) + Br₂(l)                    2NaBr (s)

1. d) Chlorine with hydrogen

Cl₂ (s) + H₂(g)                    2HCl (g)

Q6 Explain displacement reaction of halogens with examples.

F₂ + 2NaCl                   2NaF + Cl₂

Cl₂ +2NaF                   No reaction

Banner 9

PURE SUBSTANCE

• Pure Substance is an element or a compound that is made up of only one substance.
• Pure substances have fixed melting and boiling point. Finding the melting and boiling points will provide the test for purity.
• Impurities makes the substance impure and alters the melting and boiling point.
• Impurities lowers the melting point but increases the boiling point.

Banner 4

FORMULATIONS

Mixtures made to make if useful for the mankind.

• Fuels
• Cleaning Agents
• Paints
• Medicines
• Alloys
• Fertilizers
• Foods

CHROMATOGRAPHY

• Components in the mixture are separated on the basis of solubilties of different components of the mixture in a suitable solvent.
• A capillary tube is used to spot the mixture on the chromatography paper.
• The paper is put inside a solvent and the solvent is allowed to run up the chromatography paper.
• The component of the mixture which is more soluble in the solvent will travel greater distance and will leave its mark near the top.’
• The component which is less soluble will have a mark near the bottom.

R_f  = S/L <  Distance travelled by solute

Banner 5

TEST FOR GASES

	Reaction	Test	Observation
Hydrogen	Metal higher in reactivity than hydrogen react with acid producing hydrogen	Bring a lighted splint to the mouth of the test tube containing hydrogen	The splint burns with the squeaky pop
Oxygen	Electrolysis of Water produced oxygen or decomposition of hydrogen peroxide	Bring a glowing splint to the mouth of the test tube containing oxygen.	The glowing splints relights.
Carbon Dioxide	Metal carbonate with dilute acids produce carbon dioxide	Pass the gas released to lime water	Limewater will turn milky
Chlorine	Electrolysis of brine	A damp blue litmus paper held at the mouth of the test tube	Bleached blue litmus paper

Baneer 6

 TEST FOR CATIONS

Nichrome wire dipped in concentrated hydrochloric acid

Heated

Dipped in acid again

Dipped in metal compound

Touched on the roaring blue bunsen flame

TEST FOR CATIONS

FLAME TEST              Add Aqueous Sodium Hydroxide

White Precipitate                                             Coloured Precipitate

Al³⁺           Mg²⁺          Ca²⁺                                 Cu²⁺         Fe²⁺      Fe³⁺

Soluble       No colour     Red

TEST FOR ANIONS

Carbonates CO32-	Halides Cl– Br– I–	Sulphates SO42-
Add dilute acid Effervescence of Carbon dioxide Pass to limewater  Limewater turns milky	Add dilute nitric acid  Add silver nitrate solution  Precipitate confirms thalide Yellow precipitate – Iodide Ions – I– Cream Precipitate – bromide ions -Br– White precipitate – chloride ions – Cl–	Add dilute hydrochloric acid Add barium chloride solution A white precipitate confirms sulphate

Banner 7

INSTRUMENTAL ANALYSIS

Flame emission Spectroscopy

• Each metal forms a characteristic line spectrum when placed inside a spectrometer.
• The line spectrum is compared with the database to detect the metal ion.
• The absorbance value gives the information about the concentration of metal ions.
• Can detect traces of metal ions in sample of air, steel or any other metal.

Banner 8

KEY TERMS

• Pure Substance – Pure Substance is an element or a compound that is made up of only one substance. Examples of pure substances include water, diamond, bronze, iron, silver and gold.
• Formulations – Mixtures made to make if useful for the mankind. It is a mixture of ingredients prepared in a certain way and used for a specific purpose.
• Chromatography – Components in the mixture are separated on the basis of solubilties of different components of the mixture in a suitable solvent.
• Mobile phase/moving phase – Solvent that moves through the column. Could be gas or liquid.
• Stationary phase/ nonmoving phase – substance that remains fixed inside the column.
• Flame emission Spectroscopy – Each metal forms a characteristic line spectrum when placed inside a spectrometer. The line spectrum is compared with the database to detect the metal ion.
• Chromatogram – A chromatogram is the visual output of the chromatograph
• Flame Test – A flame test is an analytical procedure used to detect the presence of some elements, mainly metal ions, depending on the characteristic of the emission spectrum of each element.
• Instrumental Analysis – Analytical chemistry studies and use the tools and methods used to separate, identify and quantify matter.

Disclaimer:

I have tried my level best to cover the maximum of your specification. But this is not the alternative to the textbook. You should cover the specification or the textbook thoroughly. This is the quick revision to help you cover the gist of everything. In case you spot any errors then do let us know and we will rectify it.

References:

BBC Bitesize

Wikipedia

Wikimedia Commons

Image Source:

Wikipedia

Wikimedia

Commons

Flickr

Pixabay

Make sure you have watched the above videos and are familiar with the key definations before trying these questions. It is also good to time yourself while doing these questions so that you can work on the speed as well.

Chemistry Of The Periodic Table

• Periodic Table 1 MS
• Periodic Table 1 QP
• Periodic Table 2 MS
• Periodic Table 2 QP
• Periodic Table 3 MS
• Periodic Table 3 QP
• Properties of Transition Metals 1 MS
• Properties of Transition Metals 1 QP
• Properties of Transition Metals 2 MS
• Properties of Transition Metals 2 QP
• Properties of Transition Metals 3 MS
• Properties of Transition Metals 3 QP

Chemical Analysis

• • Identification of Common Gases 1 MS
  • Identification of Common Gases 1 QP
  • Identification of Common Gases 2 MS
  • Identification of Common Gases 2 QP
  • Identification of Common Gases 3 MS
  • Identification of Common Gases 3 QP
  • Identification of Ions by Chemical & Spectroscopic Means 1 MS
  • Identification of Ions by Chemical & Spectroscopic Means 1 QP
  • Identification of Ions by Chemical & Spectroscopic Means 2 MS
  • Identification of Ions by Chemical & Spectroscopic Means 2 QP
  • Identification of Ions by Chemical & Spectroscopic Means 3 MS
  • Identification of Ions by Chemical & Spectroscopic Means 3 QP